Fixed Competitive Price Ferrite Core For Transformer - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe
Fixed Competitive Price Ferrite Core For Transformer - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe Detail:
Introduction
It is a UT type common mode inductor, which is mainly used for the voltage input end of DVD power supply. It can eliminate common mode interference and optimize EMC parameters. With a closed-type iron core of high permeability, LCL-20-068 performs well in high-frequency impedance and is usually suitable for occasions where the working current is not very large due to its limited winding space.
Parameters
| NO. | ITEMS | TEST PIN | SPECIFICATION | TEST CONDITIONS | |
| 1 | Inductance | L（1-2） | 2.9mH MIN | 1.0KHz,1.0Vrms | |
| L（3-4） | |||||
| 2 | Inductance Deflection | I L1-L2 I | 500uH MAX | 1.0KHz,1.0Vrms | |
| 3 | DCR | R（1-2） | 0.3Ω MAX | AT 20℃ | |
| R（3-4） | |||||
Dimensions:（Unit: mm）& Diagram
Features
1. UT20 structure and double-slot roller BOBBIN
2. Ferrite core of high permeability
3. Two windings are wound symmetrically after the magnetic core is pre-installed
4. Wound by special automatic winding equipment
Advantages
1. Roller BOBBIN structure is suitable for automatic equipment winding, which greatly improves the production efficiency
2. With closed high-conductivity core, the inductance is more stable than non-closed structures such as UU type
3. Compact structure, consistent in size, and easy to assemble
4. Perform well in impedance
Video
Your browser does not support video tags.
Certificates
Our Customers
Company Profile
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Fixed Competitive Price Ferrite Core For Transformer - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe, The product will supply to all over the world, such as: Sierra Leone, San Diego, Cannes, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Anastasia from Niger - 2017.05.02 11:33
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Esther from Italy - 2018.02.12 14:52
