Leading Manufacturer for Smps In Power Electronics - UU10.5 Common Mode Choke Line Filter Inductor – Sanhe
Leading Manufacturer for Smps In Power Electronics - UU10.5 Common Mode Choke Line Filter Inductor – Sanhe Detail:
Introduction
SANHE-UU10.5 is mainly used to eliminate or reduce the common mode interference generated by inverter circuit during energy transmission process. To prevent EMC index from exceeding standards and to effectively block the electromagnetic interference, inductor usually needs to have a higher inductance and high-frequency impedance. Its ferrite core also needs to have high magnetic permeability.
Parameters
| NO. | ITEMS | TEST PIN | SPECIFICATION | TEST CONDITIONS | |
| 1 | Inductance | 2-1 | 25mH Min | 1KHz,0.25Vrms | |
| 3-4 | |||||
| 2 | DCR | 2-1 | 0.85Ω Max | At 25℃ | |
| 3-4 | |||||
| 3 | Inductance Deflection | I L1-L2 I | 0.4mH Max | 1KHz,0.25Vrms | |
| 4 | HI-POT | COIL-COIL | No Broken | AC1.0KV/5mA/60Sec | |
| COIL-CORE | |||||
Dimensions:（Unit: mm）& Diagram
Features
1.UU-shaped structure and iron core fixed with steel clips
2. Use iron core with high magnetic permeability. The surface of iron core where it connects needs to be very smooth
3. Add isolation tape between the iron core and the winding to improve the insulation.
Advantages
1. Compared with structure of common mode inductor of magnetic ring, LCL-20-040 is smaller and has a higher production efficiency
2. UU type Bobbin can be wound with more turns
3. Pin-type vertical structure, perform well in size consistency, easy to install and use
Video
Your browser does not support video tags.
Certificates
Our Customers
Company Profile
Product detail pictures:
Related Product Guide:
With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Leading Manufacturer for Smps In Power Electronics - UU10.5 Common Mode Choke Line Filter Inductor – Sanhe, The product will supply to all over the world, such as: Maldives, Sierra Leone, Washington, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Iris from Ghana - 2018.06.28 19:27
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Hilary from Colombia - 2018.03.03 13:09
