SANHE Low Frequency EI Type Vertical Horizontal Potted Encapsulated Transformer
Introduction
EI type iron power supply transformer,low loss at no load,high power output,high efficiency,low temperature rise,widely used in air conditioner,VCD,acoustics,microwave oven,amplifier,SPC exchange,UPS power supply,and the power supply meter,equipment of all kinds machine electronics,medical treatment,chemical industry,post and telecommunications,spinning,popular science.
Scope of application
Household appliances, low power industrial control products, instruments and meters and other industries.
Special No. and meaning
| Design No. |
| Iron-core stack thickness |
| The model of silicon steel sheet |
| Safety isolating transformer |
Dimensions:（Unit: mm）
Overall and installation dimension
Parameters
| Special No. | Power(W) | Overall Dimension A*B*C(mm) |
Pin Distance (mm) |
Array Distance (mm) |
Bobbin (mm) |
| DB2812XX | 0.8 | 30*27.5*24 | 10 | 20 | 8*11 |
| DB2816XX | 1.3 | 31*28*31.5 | 5 | 20 | 8*16.5 |
| DB2818XX | 2.7 | 31*28*33 | 5 | 20 | 8*18 |
| DB2820XX | 1.9 | 33.7*30.5*28.2 | 5.5/3.5/11 | 27 | 8*20 Vertical |
| DB2820XX | 2.6 | 32*28*35.5 | 5 | 20 | 8*20 Horizontal |
| DB3012XX | 1.5 | 33*28*24 | 10 | 20 | 10*12.5 |
| DB3518XX | 2.7 | 37*31.6*33 | 5 | 21 | 12*18 |
| DB3518XX | 3 | 38*32.5*36 | 5 | 22 | 10*18 |
| DB3520XX | 2.6 | 37*35.6*36 | 10 | 30 | 10*20 Vertical |
| DB3525XX | 5 | 40.7*37.7*33.4 | - | - | 11.6*25 |
| DB4214XX | 5 | 45*38*33 | 10 | 25 | 42*14.5 |
| DB4013XX | 5 | 43.5*43.5*24 | 5.6.22 | 31 | 13.4*13 |
| DB3310XX | 3 | 53.5*35.5*20 | 5 | 35 | 11*10 |
Features
● Compact design, Low-noise and light in weight.
● Economic and efficient to reduce network loss and working cost.
● High reliability in operation.
● Low temperature rise and long service life.
● High short circuit and insulating strength.
● Overload capability in compliance with IEC 60354.
● Sealed construction to prevent moisture entry.
● Extended creepage HV bushings as standard execution.
● Utec’s standard proven surface treatment.
● Flexibility in designing transformers to meet customer requirements (Optimum cost)
● Competitive short delivery time.
Advantages
1.Better heat dissipation achieved through vacuum encapsulation, resulting in more output power from a smaller, more compact design.
2.Vacuum encapsulation provides protection against external influences (e.g. wash operations) and mechanical stress (e.g. vibration). It also reduces the potential of noise through vibration.
3.Dimensional accuracy of each transformer guaranteed by stable and controlled manufacturing processes, allowing for automatic pick and place operations.
