High Current 600W PQ35 Inverter Power Supply Transformer For Photovoltaic

Short Description:

Model NO. SANHE-PQ35

SANHE-PQ35 is a transformer product used in 600W photovoltaic inverter power supply. The transformer uses low-loss magnetic materials, copper foil windings, and high-temperature-resistant, reinforced-insulated stranded wires to meet the requirements of high-power, high-current, and high-reliability applications.

Send email to us

Product Detail

Product Tags

Introduction

This transformer works with a push-pull inverter circuit, which converts the variable DC voltage generated by photovoltaic (PV) solar panels into a mains frequency alternating current (AC) inverter, which can be fed back to the commercial transmission system, or for power supply. Off-grid grid use.

Parameters

NO.	ITEMS	TEST PIN	SPECIFICATION	TEST CONDITIONS
1	Inductance	9-7	200uH±5%	1KHz,1.0Vrms
2	Lk1	N2 Shorted	7.5uH Max
3	Lk2	N2 Shorted	12uH Max
4	DCR	10-1	125mΩ MAX	AT 25℃

Dimensions:（Unit: mm）& Diagram

Features

1. Use copper foil winding
2. Use 3M insulating tape
3. Use film-covered wire with reinforced insulation
4. Using high performance and low power ferrite core

Advantages

1. Suitable for high current occasions
2. Better high temperature insulation properties
3. Higher insulation capacity and reliability than conventional high-frequency transformers