High Stability Ferrite Core SMPS POT33 Switching Power Supply Transformer
Introduction
SANHE-POT33 mainly supplies power for the printer to ensure the normal operation of various components, such as control part, drive part, interface part, transmission mechanism, etc., and provide necessary protection. Since the mechanical part of the printer is structured precisely, high stability, good output voltage accuracy, and low peak voltage and current of this transformer are required.
Parameters
1.Voltage & Current Load | |
Output | Vout |
Type(V) | 24 |
Min Load(A) | 3 |
Max Load(A) | 4 |
2.Operation Temp Range: | |
The maximum temperature rise:65℃ | |
3.Frequency | |
Frequency:65KHz | |
4.Input Voltage Range(AC) | |
Min | 85V 50/60Hz |
Max | 275V 50/60Hz |
Dimensions:(Unit: mm)& Diagram
Features
1. The ferrite core of POT structure has a good anti-interference effect
2. The extended secondary output ensures sufficient safety distance
3. Good coupling design for primary and secondary, low leakage inductance
Advantages
1. Low-power design
2. Lower peak current can ensure good EMC effect
3. Low noise
4. Stable voltage output and protection voltage for chip